10
PLANER MAINTENANCE
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-4 of this
manual) BEFORE BEGINNING ANY PLANER MAINTENANCE
WARNING
Failure to obey the following procedures could result in death or serious injury.
x
Never walk under or climb on raised liftarms or a raised attachment.
x
If the attachment must be raised, block the machine with blocks or jackstands, NOT lift
jacks or hoists.
WARNING
Failure to obey the following procedures could result in death or serious injury.
x
Always wear protective equipment including a HARD HAT and EYE PROTECTION when
operating, performing maintenance, or working near this product.
BEFORE EACH USE
x
Make sure that all nuts and bolts are in place and properly tightened.
x
Make sure that all other fasteners are in place and are performing their specified function.
x
Make sure that all hydraulic fittings are tightened to specifications and that there are no leaks in any fittings
or hoses. (see the hydraulic connection section on page 7.)
x
Make sure that all safety signs are in place, are clean, and are legible.
(see the safety sign section on pages 5-6)
x
Replace any damaged parts and excessively worn parts.
DAILY
x
Grease [9] fittings: [1] on the drum shaft bearing / [4] on the wheels / and [4] on the slider bar bosses (see
parts illustration on page 12).
NOTE: Lubricate all grease fittings with a NLGI #1 or 2 multipurpose grease.
WEEKLY
x
Grease [8] fittings: [2] on the depth jack / [1] on the depth pin / [2] on the depth weldment / [2] on the tilt
jack / and [1] on the tilt pin (see parts illustration on page 12).
NOTE: Lubricate all grease fittings with a NLGI #1 or 2 multipurpose grease.
Содержание LAF5412
Страница 2: ......
