FFC LAF5412, Руководство пользователя

Страница: 11 / 19

9
PLANER OPERATION
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-4 of this
manual) BEFORE BEGINNING ANY PLANER OPERATION
Starting a Cut:
1. To begin a cut, adjust the tilt and depth jacks to
the desired tilt depth with the planer slightly
above the ground. Engage the hydraulic system
to start the drum.
2. Lower the planer, bringing the rear planer
wheels onto the ground
3. Roll the planer into the cut, until the front
wheels of the planer are on the ground.
4. Slightly lift the front loader wheels to create a
downward force on the planer. Slowly move
forward, planing in a straight line.
NOTE: Materials can vary greatly: it is recommended that cutting depth be limited to 1 inch when roughing
concrete.
WARNING
Failure to obey the following procedures could result in death or serious injury:
x Never lift this product above (a.) the operator’s eye level or (b.) to a height where
visibility is obstructed, whichever is lower.
x Never operate your Planer with the Cover open.