2/19/09
MR15554
2
INTRODUCTION
Congratulations on your purchase of a new FFC Box Scraper. This product has been
designed and built to excavate, backfi ll, grade, and scarify soil materials. You or any other
person who will be assembling, operating, maintaining, or working with this product are
required to read and completely understand the information and instructions contained in this
manual. If anyone does not fully understand every part of this manual, please obtain further
assistance by contacting the dealer from which this product was purchased or by contacting
FFC at the telephone number or address listed on the cover of this manual. Keep this
manual available for reference whenever this product is being handled or used. Provide this
manual to any new owners and/or operators.
This manual covers model(s):
13884
and
13888.
The difference between the models is the
width and the end plates on the product, details of which are covered on the parts list and
specifi cations page(s).
GENERAL INFORMATION
The purpose of this manual is to assist in assembling, mounting, operating, and maintaining
your Box Scraper. Read this manual carefully to obtain valuable information and instructions
that will help you achieve years of safe and dependable service.
The illustrations and data used in this manual were current at the time of printing, but due
to possible engineering and/or production changes, this product may vary slightly in detail.
FFC reserves the right to redesign and/or change components as may be necessary without
notifi cation to anyone.
Throughout this manual, references may be made to:
Prime Mover
The engine-driven machine to which this product must be attached.
Right, Left, Front,
Rear
Directions that are determined in relation to the operator of the equip-
ment when seated in the normal operation position.
IMPORTANT
Precautions that must be followed to prevent substandard performance.
SERIAL NUMBER LOCATION
Always refer to the model and serial number when ordering parts or requesting information
from your dealer. The serial number plate for this product is located on the top left surface of
the loader attachment plate of your Box Scraper.
Reference Information
Model Number
Loader Make
Serial Number
Loader Model
Date Purchased
Loader Serial Number
