FETtec FC G4-N v1.7, Руководство пользователя

Страница: 7 / 22

Page 7
Receiver connector:
•
GND
• 5V
• TLM: Telemetry signal to receiver (see page 10 receiver connection diagram for further
information)
•
Signal: Receiver signal to FC (see page 10 receiver connection diagram for further
information)
6 pin connector (SER1):
•
RX1: function configurable in GUI
• TX1: function configurable in GUI
• 3,3V
•
VCC: Battery voltage
• 5V
• GND
Acronym explanation:
• BEC 5V/16V: switchable voltage (in GUI) and real Pit capable
• GND: Reference Signal Ground
•
Real Pit VCC: real Pit capable VCC pin
• Reset: Reset button to force the FC in bootloader mode, not needed for normal operation
• SIG.: receiver signal (serial)
• TLM: Telemetry signal output for receiver (Serial)
• TLM / Onewire: ESC telemetry input or Onewire signal depending on configuration
• VCC: Battery input voltage (6V-27V)
• VCS: Video control signal (smart audio/tramp)
• VID. in: Analog video signal to OSD
• VID. out: Analog video signal from OSD