FETtec FC G4-N v1.7, Руководство пользователя

Страница: 4 / 22

Page 4
• FETtec Alpha FC firmware (KISS FC firmware flashable)
• Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm
◦ Mounting hole arrangement:
▪ 20 x 20mm with M2 mounting hole (expandable to M3)
▪ 30 x 30mm with M3 mounting hole
▪ 30 x 30mm mounting hole tips are removable to reduce overall FC size
• Overall height: 7,9mm
• Weight: 5,37g
•
Connector type: JST-SH-1mm
*real Pit-Mode: A power supply pin which is remotely switchable
Safety warning
•
Remove propeller before flashing and configuration
•
Warning!
→
default prop run direction is "out"!
•
always flash latest firmware before operation
•
keep distance from your quad when you arm it after you changed something
•
don't fly close to people!
Recommended steps for installation of the FETtec FC G4-N v1.7
• Connect to FETtec Configurator and update to the latest firmware (see FC firmware
update)
• Install the FC in your copter (see Connection diagrams for correct wiring and installation)
• Make sure everything is connected properly and check without propellers
• Connect to FETtec Configurator to proceed with final configuration of the FETtec FC G4-
N v1.7