Fetco HWD-2102, Руководство пользователя, Страница: 2 / 14

Go to fetco.com for the latest version of all information P119 User Guide HWD-2102 REVISED MARCH 2020 2
FETCO HWD-2102 push-button commercial hot water dispensers with portion control
Dimensions & Utility Connections HWD_2102 DRAWING1201.00005.00
Electrical Configurations
Configuration
Code
Heater
Configuration Voltage Phase Wires
Electrical Connection KW
Amp
Draw
Flow Rate*
Per hour
H210210 1 X 1.4 KW 100-120 single 2+G NEMA 5-15P 1.5 12.5 3.6 Gal/13.6 liters
H210220 1 X 2.1 KW 100-120 single 2+G NEMA 5-20P 2.2 18.3 5.4Gal/20.4 liters
H210230 1 X 3.2 KW 200-240 single 2+G NEMA 6-15P 3.3 13.8 8.2Gal/31.0 liters
H210240 1 X 3.2 KW 200-240 single 2+G cord only without plug 3.3 13.8 8.2Gal/31.0 liters
*Flow rate based on 55°F/13°C water mains supply and dispensing From (“READY” Light ON)
Portion Control: factory calibrated to dispense portion of 200ml/6.8oz—at timer setting: 5sec
Portion control is user selectable: 40-1200cc/1.4-40.6fl.oz. Portion size is controlled by setting dispense timer.
Actual portions and temperatures shown are estimated and are influenced by mains flow rate and temperature
Power Plug Configurations
Please see wiring diagrams located in back pages for installation notes.
Specifications and Requirements
Capacities & Measurements
Brewer Height Width Depth
Empty
Weight
Filled
Weight
Hot Water Tank
Capacity
Shipping
Weight Shipping Dimensions
HWD-2102
19  inch
483 mm
8inch
203 mm
16  inch
410 mm
19 lb
8.6kg
36 lb
16.3kg
1.8 gal
6.9 liter
25lb
11.3kg
26 X 13 X 17in
660 X 330 X 432mm
Water Requirements
Water Connection: Inlet:
3/8 inch male flare fitting
Mains Pressure
: 20-75 psig (138-0.517 mPa) (45psi/0.310 mPa preferred)
Minimum Flow Rate
: 1½ gpm
All commercial hot water dispensers to be supplied with filtered water from mains
The following are the factory settings—and range of variables that are adjustable:
Portion Control:
Delivery volume: factory set at 16 seconds=630ml/21.3oz
(Portion control is user selectable from minimum to maximum single dispense is 40ml/1.4 ounces to
1200ml/40.5 ounces by 1 sec to 30seconds timer adjustment)
Temperature Control : Water temperature is factory set at maximum—88°C/190°F
(Temperature is user selectable 87-96°C/189° to 205°F)
Hot Water Tank Temperature , as set by factory: 96°C/205°F inside water tank (at sea level)
Electrical Requirements: See electrical configuration charts (above) .
G
W
G
W
NEMA PLUG CONFIGURATION
NEMA 5-15P NEMA 5-20P NEMA 6-15P