battery for the duration of the charging
process:
LED green - flashing quickly
Charging internal battery at maximum
rate.
LED green - flashing slowly
80% of internal battery capacity excee
ded.
LED green - continuous light
Internal battery is charged to 90% and
then charged fully at reduced power.
LED red - flashing
General fault indication, e.g. incomplete
contact, short circuit, battery faulty.
LED red - continuous light
Battery temperature is outside the per
mitted range.
LED orange
Power failure mode, see
chapter
6.5
.
6.2
On/Off switch [1-2]
The ON/OFF switch
[1-2]
has three set
tings:
– Press once -> Switch on in lighting
mode in energy-saving stage (Stage
1: 30%)
– Press twice -> Switch to max. lumi
nosity (Stage 2: 100%)
– Press three times -> switch off
6.3
Voltage monitoring
If the minimum operating voltage is not
met during lighting mode with either in
ternal or external battery pack, the de
vice shifts to emergency mode. It re
duces luminosity and switches off after
2 minutes.
6.4
Temperature monitoring
If the device temperature does not re
main within the specified limits, the
working light switches to emergency
mode. It reduces luminosity and then
switches off after 2 minutes.
6.5
Power failure mode
The working light has a power failure
mode. It automatically lights up the
work area in the event of a sudden pow
er failure.
► Hold down the ON/OFF switch
[1-2]
and insert the mains charging
adapter or car charging adapter in
the connector socket
[1-4]
.
The working light turns off and the
charging indicator switches to flashing
orange (charging) or continuous orange
(fully charged). depending on the oper
ating state.
In the event of an interruption to the ex
ternal voltage supply, the working light
automatically switches on.
Switching off the mode:
► Press the ON/OFF switch
[1-2]
again.
Charging indicator switches to standard
mode, see
chapter
6.1
.
6.6
Operating with external Festool
battery pack [2A] + [2B]
The working light can operate with any
Festool battery pack from the BPC or
BPS series. When connected to the ex
ternal Festool battery pack, the working
light only consumes power from this
battery pack.
Only compatible Festool chargers
can charge the Festool battery
pack.
English
14
Содержание SYSLITE KAL II
