Festool SHINEX RAP 150 FE, Оригинальное руководство по эксплуатации/список запасных частей, Страница: 16 / 86

16
SHINEX
GB
Cleaning the lint filter
X Clean the lint filter [4-1] regularly on both
sides of the machine.
X
If the lint filter is heavily soiled, loosen the
screw
[4-2] , remove the filter and clean us-
ing an extractor.
The machine is equipped with special carbon
brushes. If they are worn, the power is inter-
rupted automatically and the machine comes
to a standstill.
10 Accessories
Use only original Festool accessories and Fes-
tool consumable material intended for this
machine because these components are de-
signed specifically for the machine. Using ac-
cessories and consumable material from other
suppliers will most likely affect the quality of
your working results and limit any warranty
claims. Machine wear or your own personal
workload may increase depending on the ap-
plication. Protect yourself and your machine,
and preserve your warranty claims by always
using original Festool accessories and Festool
consumable material!
Use only original Festool polishing pads. Low-
quality polishing pads may cause serious ma-
chine imbalance that decreases the quality of
the working results and increase machine
wear.
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
11 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the valid national
regulations.
EU only: European Directive 2002/96/EC stip-
ulates that used electric power tools must be
collected separately and disposed of at an en-
vironmentally responsible recycling centre.
12 Warranty
We offer a warranty for material and produc-
tion defects for all our tools in accordance with
the locally applicable legal provisions, but for
a minimum of 12 months. Within the EU mem-
ber states, the warranty period is 24 months
(verification through invoice or delivery note).
Damage caused by the operator, natural wear,
overloading, incorrect handling or through the
use of the equipment not specified in the op-
erating manual, or damage which was known
at the time of purchase, is not covered by the
warranty. Furthermore, damage caused by the
use of non-original accessories and consum-
able materials (e.g. sanding pads) is also ex-
cluded.
Complaints can only be accepted if the tool is
returned while still assembled to the supplier
or an authorised Festool Customer Service
workshop. Keep the operating manual, safety
instructions, spare parts list and purchase re-
ceipt in a safe place. Otherwise the current
warranty conditions of the manufacturer shall
apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to
the technical content of this documentation.
13 EU Declaration of Conformity
We declare under sole responsibility that this
product complies with the following directives
and standards:
98/37/EC (until 28.12.2009), 2006/42/EC
(from 29.12.2009), 2004/108/EC, EN 60745-
1, EN 60745-2-3, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
16.12.2009
REACh for Festool products, its accesso-
ries and consumable materials:
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream us-
ers" and product manufacturers, we are aware
of our duty to provide our customers with in-
formation. We have set up the following web-
site to keep you updated with all the latest
news and provide you with information on all
the materials used in our existing products:
www.festool.com/reach
Rotary polisher Serial no.
RAP 150 FE 494801; 496047
Year of CE mark: 2008