11
Symbols
Intended use
The compressed air eccentric sanders are suitable
for sanding wood, plastic, metal, stone, compos-
ites, acrylic-based mineral materials, paint/clear
coats, fillers and similar materials.
Materials containing asbestos must not be processed.
Only
use with Festool hose system IAS 2 or IAS 3
and Festool sanding pads!
The user is liable for improper or non-in-
tended use.
Technical data
* at 6 bar (87 psi) inlet pressure; n
0
, load 30N
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear eye protection.
Wear a dust mask.
Do not throw in the household waste.
n
0
no-load speed
.../min
min
-1
revolutions per minute
min
minutes
l
liter
bar
bars
lb.
pound
mm
millimetre
’’
inch
kg
kilograms
l/min liter per minute
psi
pounds per square inch
°F
degree Fahrenheit
Compressed air eccentric sander
LEX 3
LEX 3
LEX 3
LEX 3
77/2.5
150/3
150/5
150/7
Drive
Compressed-air vane motor
Sanding pad Ø
77 mm (3")
150 mm (6")
Sanding stroke
2.5 mm (3/32")
3 mm (1/8")
5 mm (3/16")
7 mm (9/32")
Idle engine speed n
0
10,500 rpm
10,000 rpm
Air consumption at rated load*
270 l/min
290 l/min
310 l/min
Air pressure
Max. inlet pressure
6.2 bar (90 psi)
Recommended minimum
5 bar (72.5 psi)
Compressed air quality i.a.w. DIN ISO
8573-1
Class 5
Recommended storage temperature
/ operating temperature
0° - 60° C / 10° - 40° C (0 °F - 140 °F / 50 °F - 104 °F)
Weight
0.7 kg (1.5 lbs)
1.0 kg (2.0 lbs)
