Festool LEX 3 125/3, Оригинальное руководство по эксплуатации

Страница: 11 / 16

11
LEX 3
Original operating instructions
1 Symbols
Symbol Significance
Warning of general danger
Read operating instructions and
safety notices!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Wear protective gloves.
Do not dispose of as domestic
waste.
2 Safety instructions
2.1 General safety instructions
General safety regulations
WARNING! Before setting up, using, repair-
ing and servicing this compressed air tool
or replacing accessory parts, you must have read
and understood all safety instructions and infor-
mation.
Ignoring warning notes and instructions
may result in serious injuries.
– Only trained and qualified persons are permitted
to set up, adjust and operate this compressed air
tool. Persons without the relevant qualifications
and training are more likely to cause accidents.
– This compressed air tool may not be modified.
Modifications may reduce the effectiveness
of safety devices and pose a greater risk to
operating personnel.
– Keep all of the attached documents and pass
on the documentation if the machine changes
ownership.
– Never use a damaged compressed air tool.
– Regularly inspect compressed air tool. The
compressed air tool must be marked with
clearly legible rated values and markings.
Replacement signs can be ordered from the
manufacturer.
Danger from ejected parts
– In the event the workpiece, accessory or
machine parts break parts may be ejected at
high speed.
– Wear impact-resistant protective goggles.
– Wear a helmet when doing overhead work. Also
assess the risks for other people.
– Secure the workpiece. Use clamping devices or
avice to hold the workpiece firmly.
Risk of getting caught
– Wear suitable protective clothing! Do not wear
loose clothing or jewellery. They can be caught
by moving parts. Wear a hair net if you have
long hair.
Risks during operation
– Wear protective gloves.
– Operating and maintenance personnel must
be physically strong enough to handle the size,
weight and power of the machine.
– Hold the machine correctly. Prepare to counter-
act normal or sudden movements - hold the
machine with both hands.
– Avoid abnormal posture. Ensure secure stance
and keep your balance at all times.
– Enable the command device for starting and
shutting down in case of an interruption to the
energy supply.
– The machine can only be operated with abrasives
which were developed for this purpose.
– Use only lubricants recommended by the
manufacturer.
– Check sanding pad before each use. Do not use
the sanding pad if it is torn, broken or has fallen.
– Avoid direct contact with the sanding pad. Wear
suitable gloves as protection.
– Never use without an abrasive.
– Risk of an electrostatic discharge if the com-
pressed air tool is used on plastic and other
non-conductible materials.
– Potentially explosive atmosphere: If explosive or
self-igniting dust is produced during sanding of
certain materials, the processing instructions
of the material manufacturer must be observed
under all circumstances.
Risk through repeated movements
– The use of the compressed air tool may cause
unpleasant sensations in the hands and arms of
the operator, as well as in the neck and shoulder
area or other body parts.
– Adopt a comfortable posture. Change posture
if working continuously.