Dust Extraction
Figure 21
21-a Diverter Storage
21-b Dust Port
21-c Retaining Ribs
Figure 22
Figure 22 shows the diverter (22-a) installed and directing
the dust to the side. The diverter can be rotated so dust can
be directed downward or to the side.
The ATF 55E can be used with the standard dust extraction
diverter or with a vacuum system. When not in use, the
diverter is stored on the sole plate of the saw (21-a). For best
performance, a vacuum system is recommended.
Connect either the diverter or a vacuum hose, by pressing
the end into the dust port (21-b) of the saw. The dust port
has two ribs (21-c) that hold the extractor in place. Tilting the
hose slightly to engage one rib first and then the other works
best.
Basic Sawing
Intended Use
The ATF 55 E is designed exclusively for the sawing of
wood, wood-like materials and plastics. With the special saw
blades for aluminum offered by Festool, this tool can also be
used for sawing aluminum. This tool should not be used for
processing other materials. The saw should not be converted
or modified for any other form of use, other than as specified
in these operating instructions.
!
WARNING:
The user is solely responsible for any damage
or accident should the machine be used for other than its
intended purpose
Figure 23
23-a The optional guide rail clamp holds the
guide rail to the workpiece.
23-b The blade is lowered to cutting depth before
entering the cut.
23-c The optional cord guide prevents the power
cord and vacuum hose from catching on the
end of the guide rail.
14
ATF 55E Circular Saw
