Festo YXCL, Руководство по эксплуатации

Страница: 9 / 56

Festo — YXCL — 2021-07b
Product overview
9
4.2 Modules of the product
4.2.1 Y-module
The Y-module EHMY-LP-EGC/ELGC consists of the Y-axis with the electric drive.
The Y-module is mounted on a vertical mounting surface, e.g. machine frame.
The Y-Z adapter plate is located on the slide of the Y-axis for connection to the Z-module.
The motor position on the Y-module is configuration-dependent, right or left.
The following components are located on the motor side:
–
Energy chain (optional for product version with ELGC axes)
–
Multi-pin plug for sensors (optional)
Product version with EGC axis
5
1
4
2
3
Fig. 3: Y-module EHMY-LP-EGC, motor position left, example
1
Energy chain
2
Y-axis
3
Mounting component for adjusting kit
4
Slide with Y-Z adapter plate
5
Motor (optional)