Festo VABF-S4-CB-VH Series, Инструкции и эксплуатация

Страница: 26 / 32

8.2 Parameter sets
The set parameters in parameter sets 0 … 3 are not stored volatilely in an EEPROM. Thus the paramet-
ers remain permanently set.
The parameters can only be changed with the FMT. In addition, the parameter sets in the FMT can be
reset to factory settings.
Parameter set 0 to 3
Parameter Code Min Max Unit
Switching point A1 SP
A1
0 99 kPa
Switching point A2 SP
A2
0 99 kPa
Hysteresis A HY
A
0 99 kPa
Air-saving function LS
EN
Active Inactive
–
Switching point B1 SP
B1
0 99 kPa
Switching point B2 SP
B2
0 99 kPa
Hysteresis B HY
B
0 99 kPa
Process quality monitoring 0 100 %
threshold evacuation time t
E
0 10000 ms
threshold air supply time t
B
0 10000 ms
Tab. 17 Parameter set 0 to 3
Parameters for teach-in
Parameter Min Max Factory setting
Learning mode Inactive – Pressure Channel A
– Pressure Channel B
– Time
– Process quality
Inactive
Start Inactive Active Inactive
Accept TP1 Inactive Active Inactive
Accept TP2 Inactive Active Inactive
Save Inactive Active Inactive
Tab. 18 Teach-in parameters
Parameter description
26 Festo — VABF-S4-...-CB-VH/VL-... — 2019-05