Festo SFE1-LF F10 Series, Руководство по эксплуатации

Страница: 49 / 60

SFE1−LF−...
Festo SFE1−LF−... 0503NH English
49
7 C a re a n d ma inten a n c e
S
Switch off the following sources of energy before cleaning:
the operating voltage
the compressed air supply.
S
If necessary, clean the exterior of the SFE1−LF−... .
Soap suds (max. + 60 °C), petroleum ether and all non−abrasive cleaning agents
are permitted.
8 D i sma ntlin g
1. Switch off the following sources of energy
before dismantling:
the operating voltage
the compressed air supply.
2. Disconnect the relevant connections of the
SFE1−LF−... .
3. In the case of hat rail or wall fitting,
dismantle the SFE1−LF−... as shown here.
4. With plate fitting: Loosen the two fasten
ing screws.
9 Acc e ss orie s
D e s i g n a tion T ype
Connecting cable M12 5−pin SIM−M12−5−..D−...
Adapter plate for wall fitting
1)
SDE1−...−W..
1)
With type SFE1−LF−...−W... included in delivery
Fig.16
Fig.14
Fig.15