Festo SFE1-LF F10 Series, Руководство по эксплуатации

Страница: 36 / 60

SFE1−LF−...
Festo SFE1−LF−... 0503NH English
36
4 Fittin g
Fittin g m e c h a ni ca l c o m ponent s
Ple as e note
Interference due to electromagnetic influences can cause damage.
S
Ensure that there is a gap of at least
x = 10mm from earthed surfaces (see following diagrams).
The valve terminal can be fitted in any position. Fasten the SFE1−LF−... as follows:
S F E1 −... −H...− − W ...− ...
Fastening Hat rail Wall fastening Plate fitting
Remarks Fit the adapter plate
(e.g. B. 2 x M3)
2)
Hang the SFE1−LF−... onto the hat rail/fasten
ing plate and press until the fastening slide
clips in. Use spacers and M4
screws
1) 2)
1)
Tightening torque 1 Nm
2)
Hole pattern see page 59
Fig.5