Festo SFC-LAC-IO Series, Краткий обзор

Страница: 20 / 74

Festo P.BE−K−SFC−LAC−IO 0604NH English 20
3 Notes on fitting and installation
Warning
Before carrying out fitting, installation and mainten
ance work, always switch off the power supply for the
electronic components.
Warning
If an axis is fitted in a sloping or vertical position, the
work load may slide down.
S
Check whether external safety measures are necess
ary (e.g. toothed latches or moveable bolts).
You can then avoid the work load sliding down if there
is a sudden power failure.
Power supply
*)
Value
Load supply
**)
Rated current (max. continuous current)
Peak current
48 V DC +5% / −10%
10 A
20 A
Logic supply
**)
Rated current / peak current
Internal fuse
24 V DC ±10%
0.4 A / 0.8 A
2.5A very quick−acting
I/O supply
Idle current / peak current
(per output max. 0.5 A)
24 V DC ±10%
0.05 A / 2.1 A
*)
The tolerances for the voltage supplies must also be observed
directly at the connections of the SFC−LAC.
**)
Connect masses for equal basis potential !