Festo SEC-ST-48-6-P01, Инструкции по установке и монтажу

Страница: 15 / 56

1. System summary
1-3
Festo SEC-ST-48-6-P01-EN en 0111NH
1.1 Overview
The SEC-ST stepper motor controller is used for simple
commissioning of stepper motors in 2-string technology.
By means of digital inputs, control can be carried out in
respect of the number of steps and the direction.
1.2 Performance characteristics
S
Bipolar chopper driver
S
Input voltage 24 V DC to 48 V DC
S
Phase current can be set up to 6 A in 8 steps
S
Automatic current reduction to 30 % of the set phase cur-
rent can be switched on
S
Full, half, quarter, fifth, eighth and tenth of a step possible
S
Step frequency max. 40 kHz
S
Manual movement with push buttons possible
S
Protective function against excess temperature and short
circuit
S
Fault output