Festo SBO Q Series, Руководство пользователя

Страница: 103 / 156

4. Commissioning
4−43
Festo P.BE−SBO−Q−EN en 0702a
Commissioning
Note
In order that the Compact Vision System is recognized in
the CP string when the power supply for the CP master is
switched on (e. g. of a CPX−CP interface), the Compact
Vision System must already be ready for operation.
·
Switch on the power supply for the Compact Vision
System at least 15 seconds before the power supply for
the CP master.
1. Make a connection to the device with the CheckKon
program and set the system parameter Function at
CANinterface" to Out".
Close the CheckKon program.
2. Switch the system off in order to avoid faults or damage.
Disconnect the power supply for the device and the CPX
terminal.
3. Connect the Compact Vision System to CP string 1 or 3.
4. Switch on the power supply for the device.
5. Make a connection to the device with the CheckKon
program and set the system parameter Function at
CANinterface" to CPI module".
6. Now connect the power supply for the CPX−CP terminal.
7. Press the Save button on the CPX−CP terminal in order to
save the new string allocation.
8. Restart the CPX−CP terminal. In order to do this, switch off
the power supply briefly for the CPX−CP terminal.
9. If any faults in the CPI module function are displayed on
the device, confirm with the fault quitting signal at input I1.