Manual
4.
Connect
Remove the supplied USB WLAN stick from its packaging and insert it into one of the six available USB
sockets in the front of the control unit of Robotino
®
.
Once the USB WLAN stick is recognized by the operating system a WLAN access point is initialized and a
web server is started that provides the web interface for the control of Robotino
®
. By default the
network name (SSID) of the access point corresponds to the specification on the nameplates of
Robotino
®
. One nameplate is located right next to the power supply connector. Connect your
SmartPhone, tablet or notebook with the specified network (e.g. Robotino.301.064). The network is
secured with the password "robotino". Enter this password when you are prompted. The initialization
of the first connection may take longer (up to 60 seconds).
Open an Internet browser and enter the IP address of Robotino
®
. The Robotino
®
web interface is shown
in your Internet browser. The IP address upon delivery (172.26.1.1) can also be found on the nameplate.
5.
Test
To test your Robotino
®
, switch to web interface page Program and start one of the demonstration
programs. Alternatively, you can switch to web interface page Control to manage the movement of
Robotino
®
individually. Make sure that a sufficiently large clear area is available for the movement of
Robotino
®
.
6.
Turn off
Press the main switch of Robotino
®
for about 3 seconds to turn off the system.
24
© Festo Didactic GmbH & Co. KG 8029476
