Festo HSP AE Series, Руководство пользователя

Страница: 148 / 174

7. Diagnosis
7−6
Festo P.BE−HSP−AE−IO−EN en 0510NH
7.3 Fault messages on the display
Messages Messages inform about operating states.
Message Cause
Warning Motor
moves... Message at the start of a Teach procedure. After
confirmation with the <ENTER> button the drive
moves in the Teach mode.
Profile velocity
= 0. Please
teach v. The menu command [Move position set] is not
processed because the positioning speed of the
positioning set v = 0. Modify the parametrizing or
select a different postioning set.
Temperature OK Operating temperature lies in permitted range
again after exceeding/not reaching limit.
Warning In the event of non−permitted operating temperatures, the
motor unit displays an appropriate warning. If a positioning
task is running, it will not be interrupted. The fault LED will
flash.
Warning Cause
HOT
TEMPERATURE Operating temperature 70 °C < T < 80 °C,
check whether drive is overloaded, check the
mechanical parts, e.g. for stiffness, reduce
ambient temperature.
COLD
TEMPERATURE Operating temperature < −10 °C,
if necessary, increase ambient temperature.