Festo — EXPT-95/120 — 2021-08d
Safety and requirements for product use
5
1
Safety and requirements for product use
1.1
Safety
1.1.1
General safety instructions
–
Observe the general safety information in the corresponding chapters.
Specific safety regulations can be found immediately before the task instructions.
1.1.2
Intended use
The parallel kinematic system EXPT is intended for installation in machines or automated systems for
moving an end effector in the working space of the kinematics. It should be used as follows:
–
in excellent technical condition
–
in its original condition, without unauthorised modifications
–
within the limits of the product defined by the technical data
–
in an industrial environment.
1.2
Requirements for product use
–
Make this documentation available to the design engineer, installer and personnel responsible for
commissioning the machine or system in which this product is used.
–
Make sure that the specifications in the documentation are observed at all times. Also take into
account all the documentation supplied and, if applicable, that of the associated accessories.
1.2.1
Technical prerequisites
–
Observe all warnings and instructions in this documentation for correct and safe use of the product.
–
Comply with the connection and ambient conditions of the product and all connected components
as specified in the technical data.
Only compliance with the limit values and/or load limits will enable operation of the product in
accordance with the relevant safety directives.
1.2.2
Training of qualified personnel
The product should only be installed by properly trained personnel in accordance with this description.
The trained personnel must be familiar with:
–
the applicable instructions for accident prevention and occupational safety and
–
the documentation for the product.
