ELGS-TB
Toothed belt axis unit
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
Operating instructions
8151473
2021-02b
[8151475]
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
IO-Link® is a registered trademark of its respective trademark holder in certain
countries.
1
About this document
1.1
Applicable documents
All available documents for the product
Type
Product
Table of contents
EMCS-ST
Integrated drive
Manual
ELGC-TB
Toothed belt axis
Operating instructions
EAMM-A
Axial kit
Assembly instructions
NEFC-M12G8-0.3-M12G5-LK
Adapter
Assembly instructions
Tab. 1: Applicable documents for the product
1.2
Product version
This documentation refers to the following datasets:
–
Firmware version of the integrated drive from "v19.0.4.107_release"
–
IO-Link device description file (IODD) from V1.2.6
When using a different firmware version, check whether a corresponding version
of the documentation is available
2
Safety
2.1
Safety instructions
–
Observe labelling on the product.
–
Prior to assembly, installation and maintenance work: Switch off power supply,
ensure that it is off and secure it against being switched back on.
–
Store the product in a cool, dry, UV-protected and corrosion-protected environ-
ment. Ensure that storage times are kept to a minimum.
–
Observe tightening torques. Unless otherwise specified, the tolerance
is ± 20 %.
2.2
Intended use
The toothed belt axis unit ELGS-TB is intended for the linear movement of pay-
loads or as a drive when external guides are used between two end positions.
The toothed belt axis unit ELGS-TB is approved for slide operation.
Fig. 1: Slide operation
2.3
Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can
evaluate the work and detect dangers.
The qualified personnel have knowledge and experience in dealing with electric
drive systems.
3
Additional information
–
Contact the regional Festo contact if you have technical problems
–
Accessories and spare parts
4
Product overview
4.1
Scope of delivery
The following components are included in the scope of delivery:
–
Toothed belt axis unit ELGS-TB
–
Instruction manual for the toothed belt axis unit ELGS-TB
–
Adapter for IO-Link operation (optional accessory)
4.2
System overview
1
2
3
4
5
6
Fig. 2: System overview ELGS-TB
1
PELV fixed power supply for load
voltage
2
PELV fixed power supply for logic
voltage
3
Application software
4
PC or laptop
5
Controller or IO-Link master
6
Toothed belt axis unit ELGS-TB
Items
1
…
5
are not included in the scope of delivery.
4.2.1
Product design
1
2
3
4
5
6
7
Fig. 3: Product design ELGS-TB
1
Sealing air connection
2
Toothed belt axis ELGC-TB
3
Product labelling
4
Axial kit EAMM
5
Integrated drive EMCS-ST
6
Warning symbol "Attention! Hot
surface"
7
Controller housing
Electrical connections, display and operating components (HMI)
1
2
3
4
5
6
7
8
Fig. 4: Electrical connections, display
and operating components
(HMI)
1
LED display menu (Speed Out, ...,
Demo)
2
LED parameter display
3
LED C/Q
4
Connection for load voltage
[Power]
5
Logic voltage connection and dig-
ital I/O or IO-Link connections
[Logic]
6
Pushbutton actuator (right arrow)
7
Pushbutton actuator (Edit)
8
Pushbutton actuator (left arrow)
5
Transport
NOTICE
Unexpected and unbraked movement of components
• Secure moving components for transport.
1. Take product weight into account
2. Maintain support clearance
£
300 mm when attaching transportation aids.
6
Assembly
WARNING
Risk of injury due to unexpected movement of components.
The drive can move freely in the voltage-free state. This can cause unexpected
movements of the connected mechanics and crush parts of the body.
• Bring moving parts of the mechanical system into a safe position.
•
Mount product
è
"Toothed belt axis ELGC-TB" instruction
