7 / 23
Festo 7CRHDb_en
2.2
Type codes (ascertaining the features of a cylinder)
The precise features of the current cylinder with piston rod can be ascertained with the help of the rating plate on
the cylinder. The type designation is located directly beneath the Festo logo and describes the cylinder's features
separated by a hyphen (-).
Example:
CRHD-32-100-PPV-A-MC-S6
195549 AN
max. Druck 10 bar
1
4
2
3
1
Type designation
2
Serial number
3
Technical information
4
Part number
The type designation on this rating plate provides the following information:
CRHD
Cylinder of the type CRHD
32
Piston diameter 32 mm
100
Stroke 100 mm
PPV
Adjustable end-position cushioning
A
Sensing option (magnetic piston)
MC
End cap with clevis
S6
Heat-resistant seals (repair-relevant feature (see chapter
2.3 "Repair-relevant features"
)
Note
A list and description of all possible equipment features of the cylinder with piston rod can be found in the data sheet.
It is available on the Festo website (
www.Festo.com
).
2.3
Repair-relevant features
Some of the features that the cylinder with piston rod can be equipped with require a different repair approach. These are
referred to as "repair-relevant" features and are listed in the left-hand column in the table below.
If the cylinder to be repaired has one of these repair-relevant features, the appropriate repair description (see right-hand
column in the table below) must be used.
Note
A cylinder can only have one repair-relevant feature. It can additionally be equipped with one or more other features
(see middle column).
Cylinder and repair-relevant feature
Other features
Described from page
CRHD-… without repair-relevant feature
PPV, A, MQ, MC, MS
11
CRHD-…-
S6
(heat-resistant seals up to max. 120 °C)
PPV, A, MQ, MC, MS
16
Example for the cylinder in chapter
2.2 "Type codes (ascertaining the features of a cylinder)"
Of the features in the sample cylinder, the feature "S6" is relevant to the repair. The description in
chapter
4.4 "Repairing the cylinder CRHD-…-S6"
on page
16
must therefore be used to repair this cylinder with
piston rod.
