Festo CPX-FB32, Электронное руководство

Страница: 42 / 136

2. Commissioning
2−8
Festo P.BE−CPX−FB32−EN en 0605NH
Calculating the number of inputs/outputs
Use the following table for calculating the number of inputs
and outputs on your CPX terminal.
I n p ut /o ut p ut m od u l es an d s y stem d ia g n o sis I n p uts O ut p uts
1. I/O diagnostic interface, if set + 16 I/O + _____ I + _____ O
2. Number of input modules CPX−4DE + __ x 8 I
1)
+ _____ I
3. Number of input modules CPX−8DE, −8NDE, 8DE−D + __ x 8 I + _____ I
4. Number of input modules CPX−16DE + __ x 16 I + _____ I
5. Number of output modules CPX−4DA + __ x 8 O
1)
+ _____ O
6. Number of output modules CPX−8DA + __ x 8 O + _____ O
7. Nnumber of multi−I/O modules CPX−8DE−8DA + __ x 8 I/O + _____ I + _____ O
8. Number of analogue input modules CPX−2AE−U−I + __ x 32 I + _____ I
9. Number of analogue input modules CPX−4AE−I + __ x 64 I/ x 32 I + _____ I
10.Number of analogue input modules CPX−4AE−T + __ x 64 I + _____ I
11.Number of analogue output modules CPX−2AA−U−I + __ x 32 O + _____ O
12.Number of inputs and outputs of other modules + __ I/O
(e.g. CP interface)
+ _____ I + _____ O
13.Midi/Maxi, CPA or VTSA pneumatic interface:
Number of configured valve solenoid coils (+8 O, 16 O, 24 O, 32 O)
32 O (Midi/Maxi) or 24 O (CPA) are configured at the factory.
+ _____ O
14.Number of MPA1 or MPA2 pneumatic modules + __ x 8 O
1)
+ _____ O
15.To ta l sum of in p uts /o ut p uts t o b e c o n f i g u r e d
Sum of 1 to 14: = _____ I = _____ O
1)
8 bits are always assigned (4 remain unused).
Tab.2/5: Ascertaining the number of inputs and outputs