Festo CMMT-ST-C8-1C Series, Руководство пользователя, Страница: 10 / 58

10 Festo — CMMT-ST-C8-1C-...-S0 — 2021-04b
Product overview
3 Additional information
–
Contact the regional Festo contact if you have technical problems è www.festo.com.
–
Accessories and spare parts è www.festo.com/catalogue.
Firmware, software or configuration files è www.festo.com/sp.
4 Product overview
4.1 Scope of delivery
Component Number
Servo drive CMMT-ST-... 1
Assortment of plugs NEKM-C-22 1
H-rail clamp (premounted) 1
Operating instructions CMMT-ST-... 1
Tab. 7: Scope of delivery
Below are some examples of the available accessories:
–
Patch cable for linkage of the RTE interface
Up-to-date information on the accessories è www.festo.com/catalogue.
4.2 System structure
The servo drive CMMT-ST is a 1-axis servo drive for controlling a stepper motor or an EC motor with
connected mechanisms, e.g. a Festo axis. The device is controlled by a higher-level controller using
the bus protocol EtherCAT, EtherNet/IP or PROFINET, depending on the product version, via a real-time
Ethernet interface.
The device can be parameterised via a PC using either the real-time Ethernet interface or the separate
standard Ethernet interface.
The device is an extra-low-voltage controller. The load and logic power supply must be provided by a
PELV fixed power supply.