2
Transport and storage
Festo – GDCP-CMCA-B-INST-EN – 1405NH – English
9
2.3.1
Mounting plate
Remove transport packaging
1. Loosen and remove the lower cover screws.
2. Pull cover off upwards.
Fig. 2.1
Remove the packaging foil
3. Cut the plastic sheet parallel to the contour of
the product with an appropriate tool. When
cutting, make sure that you do not damage or
scratch the components of the control system.
4. Pull the plastic sheet upward and away. Care-
fully remove the bag with drying agent and dis-
pose of it in accordance with the instructions
(
7.3 Disposal).
Fig. 2.2
Loosen mounting plate
5. Loosen and remove the screws with which the
mounting plate is screwed to the pallet.
6. With two people, lift the control system off the
pallet and bring it to the installation site.
Fig. 2.3