EGC−...−FA−...
Festo EGC−...−FA−... 0807NH English
23
I
nstalling the use
f
ul load
S
Place the useful load so that the break−
down torque of force F (parallel to the
axis of motion) and lever arm a" remains
low.
S
Fasten the useful load to the slide with
screws and centring sleeves.
S
Make sure that the maximum screw−in
depthD is adhered to.
EGC−...
70
80
120
185
Screw (side/top)
M5
M5/M6
M6/M8
Max. screw−in depth D
[mm]
8.4
9.5
10
15
Centring hole
[mm]
Ø5
Ø7/Ø9
Ø9
Tightening torque
[Nm]
5.9
5.9/9.9
9.9/24
Fig.8
With hard and stiff useful loads (e.g. steel):
Note
If the aluminium slide becomes bent against
a buckled useful load, the service life of the
guide will be reduced.
S
Make sure that the mounting surface of
the useful loads is even to within
t
Ţ
0.01mm.
Fig.6
a
F
Fig.7
Fig.9
t