6
BALANCING, AND LOCKING THE
CASTORS
Push the cooling cabinet /freezer into
place. The appliance must be installed at
the same level as the surrounding floor
surface. See page 5.
1.
Adjust the appliance to a straight
position, using two adjusting screws
(A). This requires a 10 mm open-
ended spanner.
2.
Tighten the locking screws (B).
FITTING THE BOTTOM FRONT PLATE
Fix the bottom front plate in place. The
front plate sticks onto the bottom part by
means of clamps (C).
PREVENTION OF TILTING
The cooling cabinet /freezer must also be
fixed to the wall so that it is not possible for
it to tilt forward.
The fixing is done by means of the fixing
bracket at the top of the cabinet. If a gap
remains between the fixing bracket and
the wall, then use a suitable connecting
piece.
Fixing bracket
C
B
A
