FEST YPF-6118, Инструкции по применению

Страница: 9 / 11

8
TEMPERATURE GUIDE
IRONING LABEL KIND OF TEXTILE FABRICS
Synthetic Acrylic
Polypropylene
Polyurethane
Synthetic Acetate
Synthetic Polyamide (Nylon)
Polyester
Viscose(Rayon)
Silk Silk
Wool Wool
Cotton Cotton
Linen Linen
SETTING THE TEMPERATURE
Insert the plug in the wall socket and stand the iron upright.
Turn the temperature control dial (1) to the desired temperature setting.
The desired temperature has been reached when the pilot light has turned off. The pilot light will turn on and
off from time to time, indicating that the selected temperature is being maintained.
SPRAYING
This function can be used any time and it does not affect the ironing temperature.
Ensure that your iron has enough water in its water tank. If not, fill water into the iron as described in section
HOW TO FILL IN WATER.
Aim the nozzle towards the garment.
Press the spray button (3).
STEAM IRONING
This function can be used only at higher ironing temperatures:
●● for moderate steam
●●● or MAX for maximum steam
Ensure that your iron has enough water in its water tank. If not, fill water into the iron as described in section
HOW TO FILL IN WATER.
Stand the iron upright.
Connect he iron to a suitable mains supply outlet
Turn the temperature control dial(1) to the “●●”, “●●●”or MAX setting
The pilot light turns off when the required temperature is reached. The iron is ready for use.
Turn the steam control knob(7) to the required position, steam starts coming out from the holes in the sole
plate.
Notice: With conventional steam ironing, water may leak from the sole plate if a low temperature has been select.
If this happens, turn the temperature control dial (1) to the advised position. Steam will recommence as soon as
the appropriate temperature has been reached.
ATTENTION: Do not aim iron at face, towards yourself, or anyone else while using or adjusting steam. Burns or
serious injury may occur.
BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles.
Ensure that your iron has enough water in its water tank. If not, fill water into the iron as described in section
HOW TO FILL IN WATER.
Turn the temperature control to the position “MAX”
The pilot light turns off when the required temperature is reached