Fesia Grasp, Инструкция по эксплуатации

Страница: 32 / 33

PARAMETER DESCRIPTION
Manufacturer
FRIWO
A Connector
IP42 approved interchangeable plug system
B Connector
Micro-USB
Output Voltage 5 VDC
Supply Voltage
100-240 VAC 50-60Hz
Current
1400mA
Others
IEC 60601-1 approved
Protection
Class II
PARAMETERS MODULE 1
Function
Stimulator Main
Module
Lairdtech BT900
Frequency (MHz)
2402-2480
Max. declared output power (dBm)
8
Max. antenna gain (dBi)
+0,5
Max. E.I.R.P (dBm) 8,5
Max. E.I.R.P (mW) 7,08
EMISSIONS TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT GUIDANCE
RF emmisions CISPR 11
Group 1
The device uses RF energy only for its internal func -
tion. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF emmisions CISPR 11
Harmonic emissions IEC 61000-3-2
Voltage fluctuations/Flickers emis
-
sions IEC 61000-3-3
Class B
Class A
Fulfill
The device is suitable for use in establishments
other than domestic and those directly connected
to the public low-voltage power supply network that
supplies buildings used for domestic purposes.
The device must not be used next to or mounted above or below another piece of equipment. If this cannot be avoided, the
equipment should be checked for normal operation in the configuration in which it will be used.
The use of accessories other than those specified for the equipment is not recommended. This could result in an increase in emissions
or a decrease in the immunity of the equipment.
GUIDANCE AND MANUFACTURER’S DECLARATION– ELECTROMAGNETIC EMISSIONS
INSTRUCTIONS FOR USE | Fesia Grasp 63
62 INSTRUCTIONS FOR USE | Fesia Grasp
CHARGER SPECIFICATIONS EMI TABLES
TECHNICAL INFORMATION 06 06 TECHNICAL INFORMATION