CONFIGURE AND ACTIVATE THE REMOTE CONTROL IN 4 EASY STEPS
Phase 1. Set the time and day of the week
1. Press
the
key. The day starts fl ashing: use the
keys to set the correct day of the week considering
that DAY 1 corresponds to Monday and DAY 7 to Sunday.
2. Press
the
key. The hours value starts fl ashing: use the
keys to set the hour from 00 to 23.
3. Press
the
key. The minutes value starts fl ashing: use the
keys to set the minutes from
00 to 59.
4. Press
the
key.
Phase 2. Setting the automatic weekly program
Once the time and day of the week have been set, the remote control will follow the factory-set automatic
program. The heating program has 6 daily time bands for temperature levels, numbered from 1 to 6. The
time bands can be set between 00:00 and 24:00 in steps of 10 minutes. Each temperature level can be set
between 7°C and 32.5°C in steps of 0.1°C. You can therefore program any combination of time and tem-
perature during each 24-hour period; the settings can be different for each day of the week. The factory-set
automatic program is as follows:
Follow the instructions given below to change the factory-set automatic program.
1. Press
the key. If domestic hot water programming is enabled, select the radiator symbol using the
keys and confi rm with the
key. The 6 daily time bands start fl ashing and number 1 of DAY 1 is shown in a
box to indicate that time band 1 of DAY 1 (Monday) can be modifi ed.
2. Press
the key. The hours and minutes display starts fl ashing: use the
keys to change the start time of
the time band in steps of 10 minutes. To change the hour and minutes values rapidly keep the key pressed.
3. Press
the key. The room temperature value starts fl ashing: use the
keys to change the temperature
value in steps of 0.1°C. To change the temperature value rapidly keep the key pressed.
4. Press
the key. The 6 daily bands start fl ashing.
5. Now press the
key to display time band 2 of DAY 1 (Monday) and personalise it by repeating steps 2 to 4.
6. The remaining bands can be displayed by selecting bands 3, 4, 5 or 6 using the
keys and repeating
the operation described in step 5.
7. You can now set the program for the following day:
a. Press
the
key to display DAY 2. The Tuesday program can be personalised by repeating steps 2 to 6.
b. To copy the Monday program to Tuesday, press the
key. To copy the same program also to the other days
of the week, press the
key repeatedly .
Caution! When setting the program make sure that the start time of each band is different
Phase 3. Operation mode selection
OFF mode selection - If the house is to be unoccupied for prolonged periods (see also Holiday Function) or
if you simply want to switch off the heating, press the
key to display the
symbol. The heating
system will be switched off and will only switch on again if the room temperature falls below 5°C: protection
function to safeguard against freezing. If equipped with a storage tank, the boiler will not deliver domestic
hot water; Instant hot water boilers, however, will continue to produce hot water.
Summer mode selection - If you want to switch off the heating while maintaining the domestic hot water
function, press the
key to display the
symbol. The heating system is switched off and reactivated
only if the room temperature falls below 5°C: protection function to safeguard against freezing. Irrespective
of the boiler type, it will continue to produce hot water.
Winter mode selection - To reactivate the heating system and restore the previously set operating mode,
press the
key again to display the
symbol. Irrespective of the boiler type, it will continue
to produce hot water.
Heating system automatic operation (in winter mode) - Press the
key to display the
symbol. The
remote control will function in accordance with the automatic weekly program, displaying the 6 time bands:
the currently active time band is displayed in a box. If the box is not shown on the display, this indicates that
the current time is between 00:00 hours and the start time of time band 1.
Preset temperature level override - In automatic mode the room temperature can be temporarily changed
by pressing the
keys to change the value in 0.1°C steps. To change the temperature value rapidly
keep the key pressed. The override function, shown on the display with a fl ashing symbol, will be cancelled
the at the time of the next time band change.
Heating system manual operation (in winter mode) - To use the remote control at a fi xed room temperature,
press the
key to display the symbol (the 6 time bands are no longer displayed). Now set the room
temperature value by means of the
keys, in 0.1°C steps. To change the temperature value rapidly
keep the key pressed. Manual mode operation will proceed until a different mode is selected.
Phase 4. Heating system - domestic hot water temperature adjustment
Heating - Press the
key: the display shows the current value of the heating circuit water temperature;
use the
keys to change the value in 1°C steps. Press any key to quit the menu.
Domestic hot water - Press the
key: the display shows the current value of the domestic hot water
temperature value; use the
keys to change the value in 1°C steps. Press any key to quit the menu.
SPECIAL FUNCTIONS
Holiday Function
The Holiday Function is used to switch off the heating system (and production of domestic hot water for boilers with
a storage tank) for a specifi c period of time, which can be from 1 hour to 45 days, adjustable in 1 hour steps. This
makes it possible to save energy consumption when you're away from home, reactivating the previously programmed
operating mode as soon as the Holiday function ends. The heating system is activated only if the room temperature
falls below 5°C: protection function to safeguard against freezing.
Follow the instructions given below to activate and program the Holiday function.
1. Press
the key. The
symbol starts fl ashing and the hours/minutes display switches to -00:01, repre-
senting the time remaining before the end of the Holiday function.
2. Use
the
keys to extend the time remaining until the end of the Holiday function in 1 hour steps (-00:01
means 1 hour; -45:00 means 45 days). To change the hours and days rapidly keep the key pressed.
3. During the Holiday function the display will continue to show the time remaining until the end of the func-
tion.
To cancel the Holiday function press the
key or any other key associated with a different operating mode.
USER PARAMETER EDITING
Sliding Temperature - Compensation curve
By installing the external probe (optional), the control system can work with a Sliding Temperature. The
outdoor temperature sensor must be connected to the boiler control card: refer to the boiler manual for
details. In this mode, the heating system temperature is controlled in relation to weather conditions in such
a way as to ensure the maximum comfort and energy effi ciency throughout the year. Specifi cally, as the
ambient temperature increases the temperature at the outlet to the heating circuit decreases in accordance
with a specifi c compensation curve. With the Sliding Temperature control the temperature corresponding to
the "Heating temperature control" setting becomes the maximum heating circuit delivery temperature. It is
advisable to set the heating temperature control to maximum in order to allow the system to perform sliding
temperature control functions over the entire operating range of the boiler.
The compensation curve can be set from 1 to 10 according to the following diagram.
Set the compensation curve to 0 to disable Sliding Temperature control.
The system must be adjusted at the time of installation by qualifi ed personnel. However, the user can make any
further adjustments necessary to optimise comfort levels. If room temperature is too low, set a compensation
curve with a higher number, and vice versa. Increase or decrease the compensation curve setting one step
at a time and check the result in terms of room temperature.
1 Mode selection key: OFF, summer winter/reset
faults
2 Automatic/manual heating mode key
3 Heating - domestic hot water programming key
4 Time and day programming key
5 Heating temperature adjustment key
6 Hot water temperature adjustment key
7 User information/settings key
8 Holiday function key / copy heating - hot water
program day
9 Manual room temperature decrease key
10 Manual room temperature increase key
11 Heating program time bands
12 Day of the week
13 Hour and minutes
14 OFF mode
15 Manual heating symbol
16 Automatic heating symbol
17 Holiday function symbol
18 Burner On symbol and current output level
19 Summer mode symbol
20 Domestic hot water symbol
21 Winter mode symbol
22 Heating operation symbol
23 Fault symbol
24 Room temperature reading
25 Antifreeze operation symbol
26 Ambient temperature (only with ambient temperature
probe connected)
From Monday to Friday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
06:30
08:00
12:00
14:00
18:00
22:30
Temperature level
21°C
18°C
21°C
18°C
21°C
16°C
From Saturday to Sunday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
08:00
10:00
12:00
14:00
18:00
22:30
Temperature level
21°C
21°C
21°C
21°C
21°C
16°C
1
2
3
10
9
8
4
5
6
7
14 15 16
17
11
19 12 13
18
21
25
23
22
26
24
20
OVERVIEW OF THE REMOTE CONTROL
Wednesday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Sunday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Starti time
Temperature level
Thursday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Friday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Saturday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Tuesday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Monday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Personal program notes
20
30
40
50
60
70
80
90
85
20
10
0
-10
-20
1
2
3
4
5
6
8
9
10
7
Temperatura esterna
°C
Temperatura di mandat
a impianto
°C
1. Hold down the key for 3 seconds.
2. The display shows parameter CU.
Use
the
keys to change the compensation
curve one step at a time. To change the value rapidly
keep the key pressed.
3. Press any of the other keys to quit the menu.
cod. 3541D390 - rev. 01 - 04/2017
EN
3
Содержание ROMEO W
Страница 16: ......
