manualshive.com logo in svg

Ferroli DOMINA N 80, Инструкция по установке, обслуживанию и эксплуатации

"Новейший котел Ferroli DOMINA N 80 - надежное и эффективное решение для отопления вашего дома. Установите, обслуживайте и используйте его правильно, следуя инструкциям по монтажу, обслуживанию и эксплуатации, которые можно бесплатно скачать с нашего сайта. Пощадите время и силу, загрузите их сейчас!"

Поделиться
Скачать
background image

DOMINA N 80

2

CE MARK

CE  mark  documents  that  the  Ferroli  gas  appliances  comply  with  the  requirement  contained  in 
European directives applicable to them.
In particular, the appliances comply with the following CEE directives and the technical specifications 
provided from them:
•  Gas appliances directive 90/396
•  Efficiencies directive 92/42
•  Low tension directive 73/23 (modified from the 93/68)
•  Electromagnetic compatibility directive 89/396 (modified from the 93/68)

Year 2000 Compliance Declaration

We  will  guarantee  that  this  products  is  altogether  suitable  for  the  data  change  in  the  Year 

2000  (boiler  has  no  dependence  from  date  change)  and  that  no  disruptions  will  occur  which  is 

caused by this product.

IMPORTANT

Your  "benchmark"  Installation,  Commissioning  and  Service  Record  Log  Book  will  be  enclosed 
in your customer information pack.
"This record must be completed and left with the end user"

"All  CORGI  Registered  Installers  carry  a  CORGI  ID  card  and  have  a  registration  number.  Both 

should  be  recorded  in  your  central  heating  log  book.  You  can  check  to  the  CORGI  registered 
by calling CORGI on 01256 372300".

Ferroli is a member of the Benchmark initiative and fully supports the aims of the programme. Benchmark 
has  been  introduced  to  improve  the  standards  of  installation  and  commissioning  of  central  heating 
systems in the UK and to encourage the regular servicing of all central heating systems to ensure safety 
and efficiency. Please see installation and servicing guidelines.

INDEX1

1. 

DESCRIPTION........................................................................................................................................

3

2. 

TECHNICAL AND DIMENSIONAL CHARACTERISTICS........................................................................................

4

3. 

INSTALLATION DETAILS ........................................................................................................................................

9

4. 

COMMISSIONING AND TESTING.......................................................................................................................

27

5. 

ADJUSTMENT AND GAS CONVERSION ............................................................................................................

28

6. 

MAINTENANCE AND CLEANING ......................................................................................................................

30

7. 

REPLACEMENT OF PARTS...................................................................................................................................

32

8. 

FAULT FINDING ...................................................................................................................................................

37

9. 

ELECTRICAL AND FUNCTIONAL SCHEME ........................................................................................................

44

10. 

USER INSTRUCTIONS ........................................................................................................................................

46

Содержание DOMINA N 80





















































Отзывы:

Нет отзывов

Похожие инструкции для DOMINA N 80

Lamborghini Caloreclima Vela X N 24 MB/IT User Manual preview
Vela X N 24 MB/IT
Бренд: Lamborghini Caloreclima Страницы: 30
Unical BAHR 12 Instructions On Installation, Use And Maintenance preview
BAHR 12
Бренд: Unical Страницы: 46
Nibe Eminent Cu 100 User'S And Installer'S Manual preview
Eminent Cu 100
Бренд: Nibe Страницы: 56
Main Combi 25 Eco Elite Installation & Service Manual preview
Combi 25 Eco Elite
Бренд: Main Страницы: 56
LAMBORGHINI Vela XN 24 MB/IT Installation And Maintenance Manual preview
Vela XN 24 MB/IT
Бренд: LAMBORGHINI Страницы: 30
DAXOM Thermotank UKDAX-160GB25 Installation And User Manual preview
Thermotank UKDAX-160GB25
Бренд: DAXOM Страницы: 29
RBI Gas boilers Installation And Operation Instructions Manual preview
Gas boilers
Бренд: RBI Страницы: 44
Camus Hydronics DynaFlame Series Installation And Service Manual preview
DynaFlame Series
Бренд: Camus Hydronics Страницы: 92
Ariston ALTEAS ONE Net 30 Installation And Servicing Instructions preview
ALTEAS ONE Net 30
Бренд: Ariston Страницы: 76
Ecotermal 10 MRT Assembly And Operation Manual preview
10 MRT
Бренд: Ecotermal Страницы: 15
STI COMBY 4000 Instructions For Use And Maintenance Manual preview
COMBY 4000
Бренд: STI Страницы: 10
Potterton Eden Two Series Maintenance Instructions Manual preview
Eden Two Series
Бренд: Potterton Страницы: 16
ACV Compact A Product Catalogue preview
Compact A
Бренд: ACV Страницы: 27
ElectraStream 200 User Manual preview
200
Бренд: ElectraStream Страницы: 56
Potterton Powermax HE 85 User Instructions preview
Powermax HE 85
Бренд: Potterton Страницы: 8
Viessmann VITODENS 100-W P25 Specification preview
VITODENS 100-W P25
Бренд: Viessmann Страницы: 4
Viessmann Vitodens 100-W WB1A Series Operating Instructions & User'S Information Manual preview
Vitodens 100-W WB1A Series
Бренд: Viessmann Страницы: 20
Potterton Promax 15 HE Installation & Service Instructions Manual preview
Promax 15 HE
Бренд: Potterton Страницы: 44

Бренды по названию

Популярные бренды

Загрузить еще бренды