Ferris IS600ZB2544, Руководство оператора

Страница: 12 / 44

Not for
Reproduction
2.) Crushing Hazard, Mower: (1.) Engage the parking brake;
(2.) Stop the engine and remove the ignition key; (3.) Properly
jack the machine and secure with jack stands before working
under the machine.
Safety Alert Symbol and Signal Words
The safety alert symbol is used to identify safety information
about hazards that can result in personal injury. A signal word
(DANGER, WARNING, or CAUTION) is used with the alert
symbol to indicate the likelihood and the potential severity of
injury. In addition, a hazard symbol may be used to represent
the type of hazard.
DANGER indicates a hazard which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazard which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazard which, if not avoided, could
result in minor or moderate injury.
NOTICE indicates an situation that could result in damage
to the product.
Safety Interlock System
This unit is equipped with safety interlock switches. These safety
systems are present for your safety, do not attempt to bypass
safety switches, and never tamper with safety devices. Check
their operation regularly.
Operational SAFETY Checks
Test 1 - Engine SHOULD NOT crank if:
• PTO switch is engaged, OR
• Parking brake is not engaged.
Test 2 - Engine SHOULD crank if:
• PTO switch is not engaged, AND
• Parking brake is engaged.
Test 3 - Engine should SHUT OFF if:
• Operator rises off seat with PTO engaged, OR
• Operator rises off seat with parking brake disengaged.
Test 4 - Blade Brake Check
Mower blades and mower drive belt should come to a complete
stop within seven (7) seconds after electric PTO switch is turned
off (or operator rises off seat). If mower drive belt does not stop
within seven (7) seconds, see your dealer.
NOTE: Once the engine has stopped, PTO switch must be
turned off, parking brake must be engaged, and the ground
speed control levers must be locked in the NEUTRAL position
after the operator returns to the seat in order to start the engine.
WARNING
If the unit does not pass a safety test, do not operate it. See
your authorized dealer. Under no circumstance should you
attempt to defeat the purpose of safety interlock system.
Features and Controls
Control Functions and Locations
The information below briefly describes the function of individual
controls. Starting, stopping, driving, and mowing require the
combined use of several controls applied in specific sequences.
To learn what combination and sequence of controls to use for
various tasks see the
Operation section.
Zero-Turn Rider Controls
5
Control Name Callout
Deck Lift Pedal A
Cutting Height Adjustment Pin B
Deck Lift Lock Lever C
Parking Brake D
Ground Speed Control Levers E
Roll Bar F
Retractable Seat Belt G
Fuel Tank Cap H
Fuel Level Gauge I
Seat Adjustment Lever J
Removable Floor Plate K
Transmission Oil Fill / Tanks (One per transmission) L
Transmission Release Levers (One per transmission) M
12 ferrismowers.com