FERREX GLS36K, Оригинальное руководство пользователя

Страница: 23 / 29

2. Disconnect the device by unplugging the power cable and remove the power
cable from the strain relief 12 .
3. Thoroughly empty the collecting bag 11 (see "Emptying the collecting bag").
Do not reattach it to the device.
4. Remove thatch etc. from the device and the collecting bag with a hand broom
and check the collecting bag for damage.
5. Tip the device on its side and remove thatch from the discharge chute and roller
compartment with a hand brush or a brush.
6. Check the roller for damaged spots and wear.
Do not use the device with a damaged roller! Exchange the roller if necessary
(for the roller type see "Spare parts list".
7. Place the device upright again.
8. Check all connections (handlebar, collecting bag) for tight fit.
The device is ready for storage.
Maintenance
Apart from the measures described in the section "Cleaning and inspection after
each use", the device is basically maintenance-free. You do not have to lubricate or
readjust any parts.
In addition, check the following once a year:
- Free wheel movement.
- Function and free movement of the height adjuster
21 .
- Function and free movement of the discharge flap 19 .
- Damage on the device (such as broken housing parts or worn collecting bag
11 ).
If you detect any defects, contact customer service or a specialist workshop. Do not
operate the device with a detected defect.
Spare parts
Contact the manufacturer via the service centre stated on the warranty card if you
need spare parts.
Part description Part number
Set of quick release fasteners 3 , 4 , 5
Aerator roller 9
Wall mount with screw anchors and screws 13 , 14 , 15
Scarifier roller 10
Cable clamp (x2) 8
Cleaning
23