Cleaning and maintenance
27
Cleaning
− Empty the dust container
5
after every use.
Be careful not to inhale any sanding dust.
− Clean the product after each use.
− Use a soft cloth or brush to clean the housing.
−
2
/
3
/
4
as well.
− Remove dust by blowing it out with compressed air.
Maintenance and care
Check the condition of the product regularly. Among other things, check to make sure:
− that the on/off switch
12
is not damaged,
− that the sanding plates
2
/
3
/
4
are in proper condition,
− that the accessories are in proper condition,
− the battery holder
10
is undamaged and clean,
− the vents are unobstructed and clean. If applicable, use a soft brush to clean
them.
If you identify any damage, you must have it repaired by a specialist workshop
to prevent risks.
Storage
1. Clean the product thoroughly prior to storage (see chapter “Cleaning”).
2. If possible, store the clean product and the accessories in the original packaging.
Transport
− Always hold the product only by the grip areas when carrying it.
− Switch off the product and remove the rechargeable battery
15
when transport-
ing the product.
− Secure the product to prevent it from slipping when transporting it in a vehicle.
− If possible, use the original packaging for transport.
Содержание FASS 20-l
Страница 2: ...1 2 3 4 6 5 Dok Rev Nr 200047_20220704...
