- Store the device in a clean, dry, frost-protected place out of
the reach of children.
1. Thoroughly clean the device (see “Cleaning”).
2. Always store device parts and accessories together with the device.
3. If possible, pack the device in the original packaging.
Transport
Transport the device and its accessories in the original packaging and protect them
from blows and vibrations.
The device is heavy. Use two hands to carry. Use the carrying-handles
20
to safely
hold the device.
Load securing for transport
- When transporting the device in vehicles, the device must be secured in
accordance with the applicable regulations (load securing).
Troubleshooting
Problem
Possible cause
Remedy
The device
1
cannot be
switched on.
The device is not powered.
Check the cables, plugs and
the power supply.
The device has a faulty fuse.
Have the device repaired by a
qualified technician.
The motor is defective.
Contact after sales support or
have the device repaired by a
qualified technician.
The sanding belt
19
shifts
significantly to the left or
right in the running direction.
Belt tracking is not correctly
set.
Adjust belt tracking (see
section "Adjusting belt
tracking").
The sanding effect of the
sanding belt
19
or disc
sander
17
is weak.
The sandpaper is worn down. Replace the sanding belt or
the sandpaper (see section
"Replacing the sanding belt"
or "Replacing the
sandpaper").
Storage
28
