- Never leave the sanding machine unattended. Always
switch off the device and only leave it once the tool has
completely come to a standstill.
• Please be aware that the sanding disc and sanding belt
will continue to run for a short while when the device is
switched off.
- In order to prevent electric shocks when inserting the
plug in the socket, do not touch the metal contacts of the
plug.
- Do not use the cable to pull the plug out of the socket.
Protect the cable from heat, oil and sharp edges.
- Only use accessories that are listed in the operating
manual.
- Avoid awkward hand positions that could cause one or
both hands to come into contact with the sanding disc or
sanding belt if you slip suddenly.
- If the sanding disc or sanding belt get stuck, or if the
device is jammed with the material being sanded, switch
off the sanding machine immediately, unplug the mains
plug and remove the blockage. Before switching the device
back on, check the sanding disc and sanding belt to ensure
that they can turn freely and are free of damage. Replace the
sanding disc or sanding belt if they are damaged.
Check the device and scope of delivery
WARNING!
Danger of suffocation!
Children may become tangled up in the packaging film when
playing with it and suffocate.
- Do not let children play with the packaging film.
Safety
14
