12
24
25
1. Loosen the table lock knob
24
by turning it anticlockwise.
2. Use the bevel gauge
25
to set the desired tilt angle.
3. Set the spacing between the worktable and the sanding disc
17
to a maximum
of 1.6 mm.
4. Tighten the table lock knob by turning it clockwise.
Mitre sanding
Use this setting to sand short ends, for instance.
13
2
1. Insert the mitre gauge
2
into the guide groove of the worktable
26
.
2. Loosen the fixing screw on the mitre gauge by turning it anticlockwise.
Operation
22
