Ferrari SF90 STRADALE 2020, Руководство пользователя

Страница: 50 / 70

50
Roadside Recovery
The DOWN-shift request from the paddle is ignored if gearshifting is
already in progress due to engine under-revving.
Sequential downshifting
During deceleration, with the brake pedal pressed and the ABS system
disabled, sequential down-shifting can be performed by holding the left-
hand “
DOWN ” paddle down.
The sequential gearshifting request is accepted until the second gear is
engaged.
Using the gearbox in “Automatic” mode
The standard DCT gearbox transmission is "Automatic".
To set "Automatic" mode, push the central lever of the gearbox selector
on the centre console towards
A and release it so that it goes back into its
initial position: the A on the gearbox selector will turn red.
When this mode is activated, the word AUTO appears in the gearbox area
on the instrument panel underneath the number corresponding to the
selected gear or
eD if the electric only mode is activated.
To exit “Automatic” mode, move the central lever of the gearbox selector
until
A on the gearbox selector and AUTO on the instrument panel go out.
R R
A
L
M
When “Automatic” mode is selected, the system automatically shifts
UP and DOWN in relation to vehicle speed, engine speed and the
torque/power requested by the driver.
When in “Automatic” mode, you can still manually shift gears using the
UP and DOWN paddles. The gearbox will remain in “Automatic” mode
and the word AUTO will appear in the gearbox area when the paddles are
used.
When the vehicle is stationary, a “N”, 1st gear or “R” request will not
result in a change from “Automatic” to “Manual”.
“Auto easy exit” mode
At each KEY-ON, the vehicle starts up in “Auto easy exit” mode unless
it was in “Automatic” or "Manual" mode when the engine was turned off.
In this case, at the next KEY-ON, it remains in the mode it was in before
KEY-OFF.
Activation of the “Auto easy exit” mode is signalled by the word AUTO
and an arrow in the gearbox display area.
In this mode, the system will automatically UP-shift and DOWN-shift
according to vehicle speed, engine revs and the torque/power request of
the driver.
To exit “Auto easy exit” mode and switch to “Manual” mode, simply
use the
UP or DOWN paddle (while the vehicle is moving) or (when the
vehicle is stationary) pull the central lever of the gearbox selector towards
M and release it: the M will turn red and the word AUTO will no longer be
displayed in the gearbox area.
If, on the other hand, you want to set the “Automatic” mode, push the
central lever of the gearbox selector towards
A as stated above. The
system will implement "Automatic” mode in full.