IT
Manuale d’uso e manutenzione
Operating and service manual
Mode d’emploi et d’entretien
Manual de uso y mantenimiento
62
EN
TRAPIANTATRICE MECCANICA
MECHANICAL TRANSPLANTING MACHINE
PLANTEUSE MECANIQUE
TRASPLANTADORA MECANICA
FPA
multiPlA
•
A questo punto avanzare con la macchina e au-
tomaticamente le piantine cominciano ad essere
trapiantate.
•
Individuare la velocità di avanzamento idonea agli
operatori addetti al trapianto.
•
Accertarsi che in base alla velocità di caricamento
prescelta la macchina sia perfettamente sincroniz-
zata tra il distributore e il corpo piantante.
• Dopo alcuni metri, fermarsi e verificare che la di
-
stanza tra le piante e la profondità delle stesse
siano quelli desiderati. Nel caso di pianta poco
profonda
(Fig. 1)
o troppo profonda
(Fig. 2)
, agire
sulla manopola
(A)
girandola in senso ORARIO per
aumentare la profondità; mentre ruotarla nell’altro
senso per diminuire la profondità.
•
Controllare che le bielle del corpo trapiantante
(B)
lavorino parallelamente al terreno, perchè questo
avvenga, agire sulla leva
(C)
delle ruote di traino.
•
Per aumentare o diminuire il carico sulle ruote po-
steriori di rincalzo, agire sul volantino
(D)
.
•
riprendere con il trapianto, verificando che le re
-
golazioni effettuate siano state eseguite corretta-
mente e che il risultato sia quello desiderato.
•
Now move the machine forward and it will automa-
tically start planting the seedlings.
•
Identify which advancement speed is suitable for
the transplanting operators.
•
Check if the machine is perfectly synchronized
between carousel and transplanting group accor-
ding to the selected loading speed.
•
After a few meters, stop and make sure that the
distance among the plants and their depth corre-
spond to the needs. In case the plant is not deep
enough
(Fig. 1)
or too deep
(Fig. 2)
, adjust the
depth by means of the knob
(A)
turning it clockwise
to increase the depth; or turning it counter clockwi-
se to decrease the depth.
•
Make sure that the connecting rods of the planting
unit
(B)
work parallel to the ground. To make this
adjust the lever of the traction wheels
(C)
.
•
To increase or to decrease the weight on the back
wheels, adjust the knob
(D)
.
•
Re-start the transplanting machine and check that
the changes have had the desired effect.
Fig. 1
Fig. 2
C
Содержание FPA MULTIPLA
Страница 2: ......