IT
Manuale d’uso e manutenzione
Operating and service manual
Mode d’emploi et d’entretien
Manual de uso y mantenimiento
58
EN
TRAPIANTATRICE MECCANICA
MECHANICAL TRANSPLANTING MACHINE
PLANTEUSE MECANIQUE
TRASPLANTADORA MECANICA
FPA
multiPlA
CONNECTION TO TRACTOR
•
The machine should be attached to the tractor on
a flat surface.
•
Check that the three-point connections are compa-
tible.
•
bring the tractor close to the machine, making sure
that there is nobody standing in between at the
time. Make the connection only while the tractor is
stationary. Fix the three connecting arms with their
pins
(A)
and insert the shear pins provided
(B)
.
•
Lift the machine and take away the support foot.
In case the tractor is equipped with
quick hitches (C) insert the two connec
-
tions on the two pins and then insert the
safety pins.
Every time the machine used, inserted the she
-
ar pins and make sure these do not come loose
from their seats.
•
Lock the lifter bars with the appropriate chains or
with parallel tensioners
(D)
. This operation must be
carried out to avoid any horizontal movement of the
machine by adjusting the tie rods so that the drive
wheels of the transplanter are aligned with those if
the tractor.
•
In case the machine is equipped with the hydraulic
markers, insert the quick hitches
(E)
to the tractor
distributor.
AGGANCIO Al TRATTORE
• L’applicazione della macchina al trattore deve av
-
venire in zona pianeggiante.
• Verificare che gli attacchi a tre punti, siano di cate
-
goria compatibile.
•
Accostare il trattore alla macchina, facendo atten-
zione in questa fase che nessuna persona estra-
nea si interponga tra gli stessi, e procedere all’ag
-
gancio solo quando il trattore è fermo. Fissare i tre
bracci di attacco con i relativi perni
(A)
ed inserire
le apposite spine di sicurezza
(B)
.
•
Sollevare la macchina ed alzare il piede di appoggio.
Nel caso la trattrice disponga del siste
-
ma con attacchi rapidi (C) è sufficiente
inserire i due attacchi sui due perni ed
inserire le spine di sicurezza.
Ogni volta che adoperate la macchina inserite le
copiglie di sicurezza e assicuratevi che i perni
non possano più sfilarsi dalla loro sede.
•
bloccare le barre del sollevatore con le apposite
catene o tenditori paralleli
(D)
. Tale accorgimento
deve essere messo in atto per evitare qualsiasi
spostamento orizzontale della macchina, registran-
do i tiranti in modo che la trapiantatrice risulti con
le ruote motrici corrispondenti a quelle del trattore.
•
Inserire gli attacchi rapidi
(E)
al distributore del
vostro trattore nel caso siano presenti i tracciatori
idraulici.
B
B
A
C
Содержание FPA MULTIPLA
Страница 2: ......