20
© Ferno Washington Italia MU-094-D February 2017
SAERBAG III
3. Flip the small ring over the large ring to line up with the eyelet hole (Figure 44).
4. Take the white loop and place it inside the small ring and eyelet (Figure 45).
Figure 44 – Flipping the small ring over the large one
Figure 45 – Placing the loop in the small ring and eyelet
Figure 46 – Placing the green string in the loop
Figure 47 – Replacing the green string in the pocket
5. Take the green string and place it in the loop coming out at the back of the strap (Figure 46).
6. Replace the green string in its pocket (Figure 47).
Check that each step has been carried out correctly and that the system is ready for use. After having prepared the system, check
that it will hold. To check that it will hold, pull the connector from the opposite part of the system. If the system does not undo
and the connector remains secured correctly, then it is ready for use.
Figure 48 – Top release system correctly prepared
Rescue Bag Configuration
