11
© Ferno Washington Italia ScoopExl - Rel.161115 - ENG
SCOOP EXL Stretcher
Stretcher configuration
HOW TO CLOSE THE STRETCHER
1. Grasp the head-end lifting handles with both hands.
2. Attach the two separate parts of the TSL in order to close the stretcher. It is not necessary to press the buttons to close the
device.
3. Repeat the same operations for the foot end.
4. Check the TSL is locked correctly. To check the device is locked correctly, grip the handles and pull, trying to separate the
two parts of the TSL, without pressing any buttons. If the two parts of the TSL do not separate, they are correctly attached and
the stretcher is closed.
4.3 How to fold the stretcher
1. Place the stretcher on a flat surface (the ground).
2. Place the locking levers in the unlocked position, facing upward, on both sides of the stretcher (Figure 8).
To unlock the latches, see Section 4.1 "
Length adjustment
", page 9.
3. Fully extend the foot section so that the hinges are fully exposed (Figure 9).
4. Place the foot section over the body section (Figure 9).
5. Place the levers in the locked position, facing downwards, on both sides of the stretcher (Figure 10).
6. If the stretcher is not used and is stored folded, ensure that all latches are in the closed position (facing downwards).
Figure 8 - Locking handles facing upwards
Figure 9 - Positioning the foot section over the body
section
Figure 10 - Locking handle facing down
Hinges
