Fermax VDS Скачать руководство пользователя страница 41

Страница: 41 / 44

VDS

Page 41

Code 97508I-1 V07_09

The call code generated by a button on one of the button panels is determined by the button’s connection to the
«call extension module» (in continuous profile button panels) or to the «button module» (in modular panels).

See the

‘Continuous Profile Panels and VDS Modular City’ sections.

Mapping

is an advanced programming function available in button panels, which allows modification of the call code

assigned «naturally» to the buttons (based on their position on the call extension module or button module;
sequentially from bottom to top and right to left). In this way it is possible to cover all button coding requirements:

Standard allocation through

call extension module

or button module

Examples of possible assignments using the

mapping functions

Floor/Residence

Very useful in systems
with general MDS input

With double panels: call assignation
depending on residence distribution

per floor.

Mapping

1. Inverse Programming.

(Can only be done if there are monitors in all the residences. 2 operators are
required).

Involves a method inverse to the current process. The steps to be followed are detailed below:

Programme the monitor from the entry panel or guard unit. (The iLOFT and

Compact monitors allow programming via the monitor itself).

Select the «inverse button programming» mode on the VDS amplifier:

Press the SW1 button (a characteristic ‘beep’ will sound from loud speaker 2).

Assign the new addresses to each button:

3.1. Activate the auto-start option on the monitor.
3.2. Press the call button associated with this monitor (residence) on the entry panel.
The call code previously programmed on that monitor will be assigned to the button (it will be stored on
the amplifier).

Repeat step 3 with all the monitors-buttons on the system.

Exit Programming:

Press the SW1 amplifier’s “button programming” button again.

The amplifier will automatically exit the programming mode after 5 minutes of inactivity.

Mapping

There are 2 ways of carrying out mapping:

When mapping is carried out, the amplifier saves the link between the natural call code (address) and the newly
assigned call code in a table.

ADVANCED PROGRAMMING:

Mapping in button panels

2. Sequential Programming.

This mapping programming mode allows call codes (addresses) to be assigned sequentially in whatever order you
require.
The steps to be followed are detailed below

Select the 'sequential button programming' mode on the VDS amplifier:

Press the SW1 button

for 5 seconds

(a characteristic ‘beep’ will sound from loudspeaker 3).

Assign the new addresses to each button:

Press the call buttons in whatever order you wish, to assign the codes on the entry panel, starting with
1, and running sequentially to the last required number.

The amplifier stores each of the buttons’ new call codes.

Exit Programming:

Press the SW1 amplifier’s “button programming” button again.

The amplifier will automatically exit the programming mode after 5 minutes of inactivity.