Fermax STAND-ALONE CONTROLLER 1 DOOR WG, Руководство по установке

Страница: 18 / 52

Cod. 97864b V09_19
8
Remarks:
The Master Units and Accept Units must be REF. 5276-5230.
The Master Code of the Master Unit and the Accept Unit must be set to the same.
Program the transfer operation on Master Unit only.
If the Accept Unit are already with the users enrolled, it will be covered after transfer.
For full 1,000 users enrolled, the transfer takes 3 minutes.
Programming Step Keystroke Combination
1. Enter Program Mode * (Master Code) #
2. Set transferring 9 6 #
Within 3 minutes, Green LED blinks twice, indicating that users' information has been transferred
successfully.
CE DECLARATION OF CONFORMITY
Hereby, FERMAX ELECTRONICA, S.A.U., declares that this STAND-ALONE CONTROLLER 1 DOOR WG Ref. 5276-5230, is in
compliance with the essential requirements of Directive RED 2014/53/UE and Directive RoHS 2011/65/UE. See website
www.fermax.com . FERMAX Avd. Tres Cruces, 133, 46017 Valencia, Spain.
https://www.fermax.com/intl/en/pro/documents/technical-documentation/DT-13-declarations-of-conformity.html
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT – DIRECTIVE 2012/19/UE
The device you have purchased is identified under Directive 2012/19/EU on
waste electrical and electronic equipment. More info: