38
6
ANNEX
6.1
Firmware updates
Sometimes it may be necessary or convenient to update a new firmware version because
improvements or corrections have been incorporated into its operation.
FERMAX's Technical Department periodically informs (through Communications, Technical Bulletins,
etc.) about the release of a new firmware update, as well as the improvements incorporated.
Contact the FERMAX Technical Department if you wish to receive the corresponding update file.
The firmware update is performed via the
.
The procedure for updating the firmware with the corresponding update file is as follows.
It is possible to update several panels at the same time, selecting the range of the corresponding IP
addresses (all of them have to be sequential).
1.
Start the
MEET System Upgraded Tool V 1.2.exe
.
2.
Click on “…” button and browse the PC to find the corresponding .IMG update file.
Up to 3 .IMG files can be selected at the same time (for the case of the update has more than
a unique .IMG file).
3.
Indicate the IP Range of the panels.
4.
Select Upgrade.
The new firmware will be installed, and the monitor will automatically restart.
