28
1.
Dial 9999,
followed by the telephone
icon.
2.
The screen will display information
about panel settings:
•
Firmware version
•
General settings
•
Serial number
•
IP address
•
MAC
ON SCREEN INFORMATION
It is possible to get basic information on the equipment configuration through the screen
NOTE
In the case the panel is configured as a 1W KEPAD, it is not possible to access the information
screen from the panel since with that configuration the panel does not allow to dial 9999, it only
admits calls to the assigned apartment.
STANDBY
If the keypad is not used, for 60 seconds the panel will turn into a screensaver. Then, if nobody is in
front of the panel, it turns off after 3 minutes for energy saving.
NOTE:
The screensaver can be customized, so it is possible that it differs from the one in the image above
.
