Ferm CDM1158, Оригинальное руководство пользователя

Страница: 7 / 92

7
EN
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
b) Children being supervised not to play with
the appliance
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Residual risks
Even when the power tool is used as
prescribed it is not possible to eliminate all
residual risk factors. The following hazards
may arise in connection with the power tool’s
construction and design:
a) Health defects resulting from vibration
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
b) Injuries and damage to property to due to
broken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic field during operation.
This field may under some
circumstances interfere with active or
passive medical implants. To reduce the
risk of serious or fatal injury, we
recommend persons with medical
implants to consult their physician and
the medical implant manufacturer before
operating this power tool.
2. MACHINE INFORMATION
Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.
Technical specifications
Model No CDM1158
Voltage 20V
Chuck capacity
0.8 - 10mm
Torque settings 17+ Drill mode
No load speed
Position 1:
0-350 /min
Position 2: 0-1300 /min
Weight 0.8 kg
Sound pressure level LPA 70.3 dB(A), K=3dB(A)
Sound power level LWA 81.3 dB(A), K=3dB(A)
Hand-arm vibration ah,D
(Drilling into metal)
2.368 m/s² K=1.5 m/s²
Model No CDA1136
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0
Ah
Recommended charger CDA1137
Weight 0.3 kg
Model No CDA1137
Charger input 200-240V~ 50/60Hz 0.4A
Charger output 21.5V 2.5A
Charging time 2.0Ah battery 60 minutes
Charging time 4.0Ah battery 120 minutes
Recomended batteries CDA1136, CDA1138
Weigth 0.36 kg
Only use the following batteries of the FERM
POWER 20V battery platform. Using any other
batteries could cause serious injury or damage
the tool.
CDA1136
20V, 2Ah Lithium-Ion
CDA1138 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1137 Quick
charger
The batteries of the FERM POWER 20V battery
platform are interchangeable with all the FERM
POWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
•
Using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.