Ferm CDM1158, Оригинальное руководство пользователя

Страница: 6 / 92

6
EN
g)
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a)
Recharge only with the charger speci fi ed
by the manufacturer
.
a charger that is
suitable for one type of battery pack may
create a risk of
fi re when used with another
battery pack.
b)
Use power tools only with speci fi cally
designated battery packs. Use of any other
battery packs may create a risk of injury and fi re.
c)
When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws or
other small metal objects that can make
a connection from one terminal to another
.
Shorting the battery terminals together may
cause burns or a
fi re.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs,
fl ush with
water. If liquid contacts eyes, additionally
seek medical help
.
Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modi
fi ed. Damaged or modi fi ed
batteries may exhibit unpredictable behaviour
resulting in
fi re, explosion or risk of injury.
f) Do not expose a battery pack or tool to
fi re or excessive temperature. Exposure to
fi re or temperature above 130 °C may cause
explosion. NOTE The temperature „130 °C“
can be replaced by the temperature „265 °F“.
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range speci
fi ed in the
instructions. Charging improperly or at
temperatures outside the speci fi ed range may
damage the battery and increase the risk of fi re.
6) Service
a)
Have your power tool serviced by
a quali
fi ed repair person using only
identical replacement parts. This will ensure
that the safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
Additional safety warnings for drills
and screw drivers
Drill safety warnings
a) Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b) Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring.
Cutting accessory contacting
a “live” wire may make exposed metal parts
of the power tool “live” and could give the
operator an electric shock.
c) Brace the tool properly before use. This tool
produces a high output torque and without
properly bracing the tool during operation, loss
of control may occur resulting in personal injury.
Safety instructions when using long
drill bits
a) Never operate at higher speed than the
maximum speed rating of the drill bit
.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
b) Always start drilling at low speed and with
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
c) Apply pressure only in direct line with the bit
and do not apply excessive pressure.
Bits
can bend causing breakage or loss of control,
resulting in personal injury.
For the charger
Intended use
Charge only 20V 2.0Ah or 4.0Ah Li-ion type
rechargeable battery packs. Other types of batteries
may burst causing personal injury and damage.