Ferm CDM1097, Оригинальное руководство пользователя

Страница: 6 / 12

EN
6 Ferm
Locking the screwdriver
Fig. 8
The screwdriver is fitted with an automatic spindle
lock feature. When the On/Off switch (2) is not
pressed, the spindle is locked. Now it is possible to
use the screwdriver (even when the battery is
empty) as a manual tool.
Screwdriving
Fig. 1
To switch the tool on, press the On/Off switch •
(2).
Press the tumbler switch (R) for clockwise •
rotation (tightening screws)
Press the tumbler switch (L) for •
counterclockwise rotation (loosening screws)
To switch the tool off, release the on/off switch.
User tips for optimum use
Always hold the tool and screwdriver bit in a •
straight line with the screw and always use the
correct type and size of bit.
If screws are difficult to tighten, try applying a •
small amount of washing liquid or soap as a
lubricant (Fig. 9).
Use the spindle lock feature to loosen very •
tight screws or to firmly tighten screws.
When screwing in wood, it is recommended to •
drill a hole with a depth equal to almost the
length of the screw. A pilot hole guides the
screw and prevents splintering or distortion of
the work piece.
5. Charging the battery
Charging battery
Fig. 10
The charging procedure starts as soon as the
mains plug of the battery charger is inserted into
the socket and the adapter plug is connected to
the appliance (the underside of the handgrip).
Put the adapter plug of the charger into the •
machine
Plug the mains adapter into the (wall) socket •
The charging process starts; the red LED is •
now on
Charging the battery takes maximum 5 hours. •
During the charging procedure, the handgrip •
of the machine warms up. This is normal.
6. Service & Maintenance
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
These machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a
soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. Separate you find an exploded view
showing the parts that can be ordered.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Warranty
The warranty conditions can be found on the
separately enclosed warranty card.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.